लाइव डेटा थोड़ी देर के लिए अनुपलब्ध है — यह पृष्ठ इस परीक्षा के विवरण की नवीनतम प्रकाशित प्रति दिखा रहा है।
State Public SectorRITES Various Posts
RITES Limited
- क्षेत्र
- State Public Sector
- स्तर
- राष्ट्रीय
- प्रकार
- सरकारी
- आवेदन बंद होने की तारीख
- घोषित होना बाकी
आपकी प्रोफ़ाइल के अनुसार पात्रता
साइन इन आवश्यकRITES Various Posts के लिए अपनी पात्रता जाँचने हेतु साइन इन करें
व्यक्तिगत परिणाम और उसके स्पष्ट कारण पाने के लिए अपनी निजी छात्र प्रोफ़ाइल का उपयोग करें।
यह प्रारंभिक प्रोफ़ाइल मिलान है। आवेदन से पहले नवीनतम आधिकारिक सूचना में हर नियम की पुष्टि करें।
परीक्षा सारांश
अवलोकन
आयोजक संस्था
RITES Limited
आपको क्या मिलेगा
Engineer, Management Trainee posts
नवीनतम सामग्री चक्र
2026
Cracked RITES Various Posts? Mentor the next batch.
Apply with the exam you cleared — our team verifies every credential against official results before a mentor appears.
Apply to become a mentorWorth preparing alongside
We cannot line RITES Various Posts up against other exams yet
This does not mean RITES Various Posts shares nothing with the exams you are preparing for — only that we have not loaded a chapter-by-chapter syllabus we can compare against, so we will not guess. We compare 0 exams whose official syllabus we have traced to the conducting body, and this one is not among them yet.
Plan with confidence
Complete exam guide
Eligibility, pattern, syllabus, dates and official resources in one structured view.
EligibilityPending verification
Planning reference — verify the current detailed notice
The dashboard must ask for vacancy number, degree/specialisation, marks, years and type of experience, current pay/CTC where applicable, age, category and disability before producing eligibility.
Exam patternPending verification
Qualification pathway
Clear each applicable stage in order
Final selection or admission still depends on the published cutoff or merit list and any applicable counselling, document, medical, preference and vacancy rules.
Selection sequence
- 1
Select vacancy number and submit supporting documents
RequiredEligibility and selection are vacancy-specific.
- 2
Written test where prescribed
RequiredFor RG/14/26 and RG/15/26: 125 objective questions, 125 marks, 2.5 hours, no negative marking; minimum 50% UR/EWS or 45% for the listed reserved categories against reserved posts.
Written Test Date: 2026-08-30
- 3
Document scrutiny and original-document verification
Required - 4
Interview
RequiredRG/13/26 uses interview at 100%. RG/14/26 and RG/15/26 use written test 60% and interview 40%, with candidates called in a 1:6 ratio.
- 5
Medical examination and appointment
Required
Paper and stage details
What each stage contains
Select vacancy number and submit supporting documents
Questions
Not stated
Maximum marks
Not stated
Duration
Not stated
Written test where prescribed
Questions
Not stated
Maximum marks
Not stated
Duration
Not stated
Document scrutiny and original-document verification
Questions
Not stated
Maximum marks
Not stated
Duration
Not stated
Interview
Questions
Not stated
Maximum marks
Not stated
Duration
Not stated
Medical examination and appointment
Questions
Not stated
Maximum marks
Not stated
Duration
Not stated
SyllabusPending verification
सभी 69 विषय और 93 अध्याय शामिल हैं — कुल 724 टॉपिक में से 420 यहाँ दिखाए गए हैं।कुछ भी हटाया नहीं गया है। हर विषय में उसकी पूरी टॉपिक सूची का लिंक मौजूद है।
Cybersecurity Fundamentals
Cybersecurity Fundamentals
- CIA triad
- security principles
- threat landscape
- attack vectors
- cybersecurity frameworks
- risk management
Network Security
Network Security
- TCP/IP
- OSI model
- routing
- switching
- VLANs
- VPNs
इस विषय के 12 टॉपिक में से 6 दिखाए गए हैं।सभी 12 टॉपिक देखें →
Infrastructure Security
Infrastructure Security
- Windows Server
- Linux administration
- Active Directory
- Group Policy
- virtualization
- endpoint security
इस विषय के 8 टॉपिक में से 6 दिखाए गए हैं।सभी 8 टॉपिक देखें →
Security Operations (SOC)
Security Operations (SOC)
- SIEM
- log analysis
- threat hunting
- incident response
- digital forensics basics
- malware analysis
इस विषय के 8 टॉपिक में से 6 दिखाए गए हैं।सभी 8 टॉपिक देखें →
Vulnerability Assessment & Penetration Testing (VAPT)
Vulnerability Assessment & Penetration Testing (VAPT)
- Vulnerability management
- CVSS
- scanning tools
- OWASP Top 10
- secure configuration
- remediation strategies
Cloud & Identity Security
Cloud & Identity Security
- IAM
- MFA
- Zero Trust
- cloud security concepts (AWS/Azure/GCP)
- container security
- CASB
Governance, Risk & Compliance
Governance, Risk & Compliance
- ISO/IEC 27001
- NIST CSF
- CIS Controls
- business continuity
- audits
- third-party risk
इस विषय के 7 टॉपिक में से 6 दिखाए गए हैं।सभी 7 टॉपिक देखें →
Data Privacy & DPDP
Data Privacy & DPDP
- Digital Personal Data Protection Act, 2023
- personal data
- consent
- data fiduciary obligations
- Significant Data Fiduciary
- breach notification
इस विषय के 10 टॉपिक में से 6 दिखाए गए हैं।सभी 10 टॉपिक देखें →
Core Java Programming
Object-Oriented Programming (OOP) Concepts
- Classes
- Objects
- Inheritance
- Polymorphism
- Abstraction
- Encapsulation
Java Fundamentals
- Data Types
- Variables
- Operators
- Control Statements
Collections Framework
- List
- Set
- Map
- Queue
- Comparable & Comparator
Exception Handling
- Checked & Unchecked Exceptions
- Custom Exceptions
- Try- with-Resources
Multithreading & Concurrency
- Thread Lifecycle
- Synchronization
- Executor Framework
- Callable & Future
- Concurrent Collections
Java Features
- Lambda Expressions
- Functional Interfaces
- Streams API
- Optional
- Date & Time API
JVM Architecture
- Heap & Stack Memory
- Class Loader
- Garbage Collection
- Memory Management
Design Patterns
- Singleton
- Factory
- Builder
- Strategy
- Observer
Reflection API
File I/O & NIO
Java Performance Optimization
Secure Coding Practices in Java
Spring Framework & Spring Boot
Spring Framework & Spring Boot
- Spring Architecture
- Dependency Injection (IoC)
- Spring Bean Lifecycle
- Spring Boot Auto Configuration
- Spring MVC
- REST Controller Development
इस विषय के 20 टॉपिक में से 6 दिखाए गए हैं।सभी 20 टॉपिक देखें →
API Design & Development
API Design & Development
- RESTful API Design Principles
- API Standards
- OpenAPI Specification (Swagger)
- API Documentation
- API Versioning Strategies
- CRUD Operations
इस विषय के 21 टॉपिक में से 6 दिखाए गए हैं।सभी 21 टॉपिक देखें →
Enterprise System Integration
Enterprise System Integration
- Enterprise Application Integration (EAI)
- Service-Oriented Architecture (SOA)
- Integration Patterns
- Cross-Organization Integration
- Cross-Border System Integration
- Government-to-Government (G2G) Integration
इस विषय के 18 टॉपिक में से 6 दिखाए गए हैं।सभी 18 टॉपिक देखें →
Microservices Architecture
Microservices Architecture
- Microservices Principles
- Service Discovery
- API Gateway
- Configuration Server
- Service Registry
- Inter-Service Communication
इस विषय के 16 टॉपिक में से 6 दिखाए गए हैं।सभी 16 टॉपिक देखें →
Database Management
Database Management
- PostgreSQL
- SQL Programming
- Complex Queries
- Joins
- Views
- Stored Procedures
इस विषय के 18 टॉपिक में से 6 दिखाए गए हैं।सभी 18 टॉपिक देखें →
Messaging Systems & Event Streaming
Messaging Systems & Event Streaming
- Apache Kafka
- RabbitMQ
- ActiveMQ
- Java Message Service (JMS)
- Message Queues
- Publish-Subscribe Architecture
इस विषय के 13 टॉपिक में से 6 दिखाए गए हैं।सभी 13 टॉपिक देखें →
API Security
API Security
- OWASP API Security Top 10
- Authentication Mechanisms
- Authorization
- OAuth 2.0
- OpenID Connect (OIDC)
- JWT
इस विषय के 19 टॉपिक में से 6 दिखाए गए हैं।सभी 19 टॉपिक देखें →
Cloud Computing
Cloud Computing
- Cloud Computing Fundamentals
- AWS Core Services
- Cloud-native Application Development
- Cloud Storage
- Cloud Networking
- API Gateway Services
इस विषय के 11 टॉपिक में से 6 दिखाए गए हैं।सभी 11 टॉपिक देखें →
DevOps & Containerization
DevOps & Containerization
- Git
- GitHub
- GitLab
- Branching Strategies
- CI/CD Concepts
- Jenkins
इस विषय के 16 टॉपिक में से 6 दिखाए गए हैं।सभी 16 टॉपिक देखें →
Monitoring, Logging & Troubleshooting
Monitoring, Logging & Troubleshooting
- Application Logging
- Centralized Logging
- ELK Stack
- Splunk
- Prometheus
- Grafana
इस विषय के 14 टॉपिक में से 6 दिखाए गए हैं।सभी 14 टॉपिक देखें →
Performance Optimization
Performance Optimization
- JVM Tuning
- Garbage Collection Optimization
- Memory Leak Detection
- Thread Optimization
- API Performance Tuning
- Database Performance Optimization
इस विषय के 12 टॉपिक में से 6 दिखाए गए हैं।सभी 12 टॉपिक देखें →
Software Engineering Practices
Software Engineering Practices
- SDLC
- Agile Methodology
- Scrum Framework
- Code Review
- Version Control
- Unit Testing
इस विषय के 14 टॉपिक में से 6 दिखाए गए हैं।सभी 14 टॉपिक देखें →
Applied Mechanics and Design
Engineering Mechanics
- Free-body diagrams and equilibrium
- trusses and frames
- virtual work
- kinematics and dynamics of particles and of rigid bodies in plane motion
- impulse and momentum (linear and angular) and energy formulations
- collisions
Mechanics of Materials
- Stress and strain
- elastic constants
- Poisson's ratio
- Mohr’s circle for plane stress and plane strain
- thin cylinders
- shear force and bending moment diagrams
Theory of Machines
- Displacement, velocity and acceleration analysis of plane mechanisms
- dynamic analysis of linkages
- cams
- gears and gear trains
- flywheels and governors
- balancing of reciprocating and rotating masses
Vibrations
- Free and forced vibration of single degree of freedom systems
- effect of damping
- vibration isolation
- resonance
- critical speeds of shafts
Machine Design
- Design for static and dynamic loading
- failure theories
- fatigue strength and the S-N diagram
- principles of the design of machine elements such as bolted, riveted and welded joints
- shafts
- gears
इस विषय के 42 टॉपिक में से 29 दिखाए गए हैं।सभी 42 टॉपिक देखें →
Fluid Mechanics and Thermal Sciences
Fluid Mechanics
- Fluid properties
- fluid statics
- manometry
- buoyancy
- forces on submerged bodies
- stability of floating bodies
Heat-Transfer
- Modes of heat transfer
- one dimensional heat conduction
- resistance concept and electrical analogy
- heat transfer through fins
- unsteady heat conduction
- lumped parameter system
Thermodynamics
- Thermodynamic systems and processes
- properties of pure substances
- behaviour of ideal and real gases
- zeroth and first laws of thermodynamics
- calculation of work and heat in various processes
- second law of thermodynamics
Applications
- Power Engineering: Air and gas compressors
- vapour and gas power cycles
- concepts of regeneration and reheat
- I.C. Engines: Air-standard Otto, Diesel and dual cycles
- Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles
- properties of moist air
इस विषय के 55 टॉपिक में से 24 दिखाए गए हैं।सभी 55 टॉपिक देखें →
Materials, Manufacturing and Industrial Engineering
Engineering Materials
- Structure and properties of engineering materials
- phase diagrams
- heat treatment
- stress-strain diagrams for engineering materials
- Elasticity
- plasticity
Casting, Forming and Joining Processes
- Different types of castings
- design of patterns, moulds and cores
- solidification and cooling
- riser and gating design
- Plastic deformation and yield criteria
- fundamentals of hot and cold working processes
Machining and Machine Tool Operations
- Mechanics of machining
- basic machine tools
- single and multi-point cutting tools
- tool geometry and materials
- tool life and wear
- economics of machining
Metrology and Inspection
- Limits, fits and tolerances
- linear and angular measurements
- comparators
- gauge design
- interferometry
- form and finish measurement
Computer Integrated Manufacturing
- Basic concepts of CAD/CAM and their integration tools
Production Planning and Control
- Forecasting models
- aggregate production planning
- scheduling
- materials requirement planning
Inventory Control
- Deterministic models
- safety stock inventory control systems
Operations Research
- Linear programming
- simplex method
- transportation
- assignment
- network flow models
- simple queuing models
इस विषय के 57 टॉपिक में से 37 दिखाए गए हैं।सभी 57 टॉपिक देखें →
Manufacturing Processes
Manufacturing Processes
- Metal casting – patterns and moulds including mould design involving feeding, gating and risering
- melting
- casting practices in sand casting, permanent mould casting, investment casting and shell moulding
- casting defects and repair
- Hot, warm and cold working of metals
- Metal forming – fundamentals of metal forming processes of rolling, forging, extrusion, wire drawing and sheet metal forming
इस विषय के 14 टॉपिक में से 6 दिखाए गए हैं।सभी 14 टॉपिक देखें →
Testing of material
Non-destructive testing
- Ultrasonic testing
- radiography
- magnetic particle testing
- eddy current testing
- dye penetration testing
Physical testing
- Tensile test
- % elongation
- % reduction in area
- hardness (Brinell, Rockwell, Vickers)
- impact test (Izod, charpy)
- bend test
Testing of material
- Chemical testing ferrous and non ferrous metals Metallography; micro and macro examination Testing of paints, rubber, textiles, wood, and plastics
इस विषय के 15 टॉपिक में से 12 दिखाए गए हैं।सभी 15 टॉपिक देखें →
Material Science
Material Science
- Thermal, chemical, electrical, magnetic and mechanical properties of material
- Structure of metals (arrangement of atoms, crystalline & amorphous structure, crystal imperfections)
- solid solution
- diffusion in metals and alloys
- transformation during cooling of metals and alloys
- deformation and metal
इस विषय के 18 टॉपिक में से 6 दिखाए गए हैं।सभी 18 टॉपिक देखें →
Computer Networking Fundamentals
Computer Networking Fundamentals
- Computer networking concepts including TCP/IP protocol suite, Ethernet technologies, routing and switching fundamentals, LAN and WAN architectures, wireless networking concepts, and networking technologies such as iSCSI and Fibre Channel Protocol
- Network design principles and implementing of LAN and Wi-Fi networks for medium-scale environments
Network Infrastructure Configuration and Management
Network Infrastructure Configuration and Management
- Configuration, administration, and monitoring of network devices such as routers, switches, firewalls, VPN gateways, and SD-WAN solutions
- Firewall configuration, high-availability firewall setup, network segmentation, access control policies, and overall network management practices
Network Security and Cybersecurity Practices
Network Security and Cybersecurity Practices
- Security protocols, network hardening techniques, endpoint security concepts, and the design and implementation of security controls such as DLP (Data Loss Prevention), EDR (Endpoint Detection and Response), and XDR solutions
- Evaluating security posture, vulnerability assessment, incident analysis, and risk mitigation techniques
Cybersecurity Compliance, Governance and Regulatory Requirements
Cybersecurity Compliance, Governance and Regulatory Requirements
- Cybersecurity governance frameworks, regulatory compliance requirements including provisions related to data protection regulations such as the Digital Personal Data Protection (DPDP) Act, security policy implementation, audit readiness, and corrective actions to strengthen compliance posture
Business Continuity, Disaster Recovery and Incident Management
Business Continuity, Disaster Recovery and Incident Management
- Disaster recovery planning, business continuity strategies, incident response processes, and implementation of short-term and long-term cybersecurity improvement measures aligned with best practices and regulatory standards
Collaboration Infrastructure and Enterprise Systems
Collaboration Infrastructure and Enterprise Systems
- Enterprise collaboration systems including centralized video conferencing solutions with MCU (Multipoint Control Unit), VPN services, DHCP, DNS, and other core network services along with their security assessment and optimization
Basic concepts of Computer Science and Engineering
आधिकारिक पाठ्यक्रम के मानकीकरण तक टॉपिक प्रतीक्षित हैं।
Programming Fundamentals and Object-Oriented Concepts
Programming Fundamentals and Object-Oriented Concepts
- Programming fundamentals including variables, data types, operators, control structures, functions, and exception handling
- Object-Oriented Programming (OOP) concepts such as classes and objects, encapsulation, inheritance, polymorphism, abstraction, interfaces, and modular programming principles
- Software design principles and code reusability practices
Software Development Life Cycle (SDLC)
Software Development Life Cycle (SDLC)
- Complete Software Development Life Cycle including requirement analysis, system design, coding, testing, deployment, and maintenance
- Various development methodologies such as Waterfall and Agile models etc, basic documentation standards, testing approaches, and version control concepts
Relational Database Management Systems
Relational Database Management Systems
- Fundamental concepts of relational databases including database design, tables, keys, normalization, and data integrity
- Knowledge of SQL including DDL, DML, and DCL commands, joins, subqueries, views, indexes, stored procedures, triggers, and transaction management concepts including ACID properties
Problem Solving and Logical Programming
Problem Solving and Logical Programming
- Logical thinking and problem-solving abilities through algorithms, flowcharts, pseudocode, and basic data structures such as arrays, strings, stacks, queues, and linked lists
- Basic understanding of computational complexity and efficient programming practices
SAP S/4HANA, ABAP and FIORI
SAP S/4HANA, ABAP and FIORI
- SAP architecture, SAP S/4HANA concepts, ABAP programming fundamentals, SAP Data Dictionary concepts, and an overview of SAP FIORI applications and architecture
Basic concepts of Computer Science and Engineering
आधिकारिक पाठ्यक्रम के मानकीकरण तक टॉपिक प्रतीक्षित हैं।
Server Installation, Configuration and Administration
Server Installation, Configuration and Administration
- Installation, configuration, tuning, monitoring, and maintenance of Windows Server and Linux server operating systems
- Enterprise server administration, remote server management techniques, user and access management, patch management, and performance monitoring of server environments
Windows Server Services and Automation
Windows Server Services and Automation
- Configuring and optimizing Windows Server applications such as IIS, DNS, DHCP, and Hyper-V
- Scripting for automation using Windows batch scripts, PowerShell basics, and routine administrative task automation
Virtualization Technologies
Virtualization Technologies
- Server virtualization including installation, configuration, and management of VMware vSphere environments (ESXi and vCenter) and Microsoft Hyper-V platforms
- Virtual machine creation, configuration, migration, monitoring, backup, and troubleshooting of virtualized environments along with performance optimization and capacity planning
Storage, Backup and Disaster Recovery
Storage, Backup and Disaster Recovery
- SAN storage concepts, enterprise storage systems, and backup technologies including enterprise backup software products
- Backup strategies, restoration procedures, virtual machine backups, system configuration backups, and disaster recovery planning concepts
Infrastructure Monitoring, Maintenance and Performance Management
Infrastructure Monitoring, Maintenance and Performance Management
- Proactive monitoring of infrastructure capacity and performance, regular system maintenance activities, hardware and software upgrades, physical-to-virtual migrations, and troubleshooting server and infrastructure related issues
- System performance analysis and capacity planning
Data Center Infrastructure and Hardware Management
Data Center Infrastructure and Hardware Management
- Physical server basics, mounting and installation of servers, rack management, cabling practices including power, Cat-6, and fiber cabling, switches, PDUs, and rack equipment installation
- Rack-level power, cooling, and space planning
Data Center Facility Systems Monitoring
Data Center Facility Systems Monitoring
- Monitoring and basic operational awareness of supporting infrastructure systems installed in the Data Center such as network devices, precision air-conditioning systems, UPS systems, power infrastructure, and Building Management Systems (BMS)
Basics of Computer Science and Engineering
आधिकारिक पाठ्यक्रम के मानकीकरण तक टॉपिक प्रतीक्षित हैं।
Test of English
Test of English
- Cloze Test
- Reading Comprehension
- Spotting Errors
- Sentence Improvement
- Sentence Correction
- Para Jumbles
इस विषय के 8 टॉपिक में से 6 दिखाए गए हैं।सभी 8 टॉपिक देखें →
Data Analysis and Interpretation
Data Analysis and Interpretation
- Number Series
- Data Interpretation
- Simplification/ Approximation
- Quadratic Equation
- Data Sufficiency
- Mensuration
इस विषय के 15 टॉपिक में से 6 दिखाए गए हैं।सभी 15 टॉपिक देखें →
Test of Reasoning & General Awareness
Test of Reasoning & General Awareness
- Seating Arrangements
- Puzzles
- Inequalities
- Syllogism
- Input-Output
- Data Sufficiency
इस विषय के 12 टॉपिक में से 6 दिखाए गए हैं।सभी 12 टॉपिक देखें →
Human Resource Management
Human Resource Management
- Human Resource Management Concepts and practices
- Role of HR Manager
- Functions of HRM
- Competency based HRM
- Organization Behaviour
- Organization design and development
इस विषय के 28 टॉपिक में से 6 दिखाए गए हैं।सभी 28 टॉपिक देखें →
English
English
- Comprehension & Basic Grammar
- Synonyms & Antonyms
- Error Spotting
- Analogy
- Active & passive voice
General Awareness
General Awareness
- Abbreviations
- Infrastructure Sector including Railways & Urban Transport
- Capital & Money Market
- Current Affairs – Economic and Political
- Who’s Who
Quantitative Ability
Quantitative Ability
- Simplification
- Simple and Compound Interest
- Percentage
- Profit and Loss
- Ratio and Proportion
- Probability
Basic of Computers
Basic of Computers
- MS Office including Advance Excel
- ERP
Reasoning
Reasoning
- Sequences and Series
- Direction test
- Coding & Decoding
- Comparison
Financial & Management Accountancy, Costing and Legal
Financial & Management Accountancy, Costing and Legal
- Ind AS 7, 8, 16, 19, 23, 24, 28, 37, 38, 40, 108, 110, 111, 115, 116
- Preparation and presentation of Standalone & consolidated Financial Statement as per Schedule-III of the Companies Act and its analysis
- Preparation and presentation of Cash Flow Statement
- Audit of Accounts of the Company by Internal, Statuary, & CAG Auditors
- Ratio Analysis
- Budgeting- Revenue & Capital
इस विषय के 20 टॉपिक में से 6 दिखाए गए हैं।सभी 20 टॉपिक देखें →
English
English
- Comprehension & Basic Grammar
- Synonyms & Antonyms
- Error Spotting
- Analogy
- Fillers
- Tenses
इस विषय के 10 टॉपिक में से 6 दिखाए गए हैं।सभी 10 टॉपिक देखें →
General Awareness
General Awareness
- Abbreviations
- Banking & Financial Awareness
- Infrastructure Sector including Railways & Urban Transport
- Capital & Money Market, Functions, Instruments, recent development Current Affairs – Economic and Political
- Government Schemes & Polices
- Indexes
इस विषय के 7 टॉपिक में से 6 दिखाए गए हैं।सभी 7 टॉपिक देखें →
Number Quantitative Ability
Number Quantitative Ability
- Simplification
- Number Series
- Simple and Compound Interest
- Percentage
- Average
- Profit and Loss
इस विषय के 13 टॉपिक में से 6 दिखाए गए हैं।सभी 13 टॉपिक देखें →
Basic of Computers
Basic of Computers
- MS Office including Advance Excel
- MS Power Point
- ERP
- Management Information System
- Digital Transactions
इस विषय के 7 टॉपिक में से 5 दिखाए गए हैं।सभी 7 टॉपिक देखें →
Reasoning
Reasoning
- Sequences and Series
- Direction & Distance test
- Coding & Decoding
- Input Output
- Syllogism
- Analogies
- Similarities
- Differences
- Problem solving
- Analysis
- Judgment
- Comparison
इस विषय के सभी 12 टॉपिक दिखाए गए हैं।कम टॉपिक दिखाएँ
Taxation
Taxation
- Individual, Corporate and International Taxation
- TDS & TCS Provisions
- Advance Tax
- Returns & Assessment
- ICDS Customs Provisions
इस विषय के 6 टॉपिक में से 5 दिखाए गए हैं।सभी 6 टॉपिक देखें →
Banking & Treasury
Banking & Treasury
- Companies Bank Accounts
- Foreign Exchange Transactions
- Financial Risk Management
- Credit Rating
- Bank Reconciliation statement
इस विषय के 8 टॉपिक में से 5 दिखाए गए हैं।सभी 8 टॉपिक देखें →
Procurement & payment
Procurement & payment
- Types of Tenders in PSUs
- MSME & GeM procurements
- TReDS Payments
- GOI Guidelines applicable on procurement of Goods/Services/ Works
- GOI Guidelines for approval of Projects & Investment
इस विषय के 6 टॉपिक में से 5 दिखाए गए हैं।सभी 6 टॉपिक देखें →
Trades Payable / Receivables
Trades Payable / Receivables
- Payment of Engineering/Works Bills
- Billing / Un-billing in Engineering Contracts
- Collection of amounts from Customers
- Ageing of Treads Payable/ Receivables
- Expected credit loss provisioning
Syllabus for Written Test for Assistant Manager (Legal)
Syllabus for Written Test for Assistant Manager (Legal)
- Arbitration and Conciliation Act-Part-I, Conciliation, 2015 & 2019 Amendments
- Indian Contract Act-Chapter-I to VI &X
- Code of Civil Procedure and Limitation Act-Basic principles
- Right to Information Act- Basic principles
- Labour Laws-Contract Labour (Regularisation & Abolition) Act, Employees’ Provident Funds & Misc. Provisions Act, Minimum Wages Act, Payment of Gratuity Act- Basic principles
इस विषय के 9 टॉपिक में से 5 दिखाए गए हैं।सभी 9 टॉपिक देखें →
Syllabus for Written Test for VC No. RG/04/26
Syllabus for Written Test for VC No. RG/04/26
- Concepts & Theory of Transport Planning and Traffic Engineering
- Planning and Analysis of Primary Traffic & Travel Surveys including Freight surveys, Traffic forecasting techniques for passengers as well as goods
- Urban transport planning & transport demand modelling process – stages, study area, zoning, data base, concept of trip genera on, trip distribution, modal split and traffic assignment
- Freight demand modelling process, methods for freight demand estimation, logistics planning and corridor-based economic analysis
- Role of transport, types of transport systems, evolution of transport modes, transport problems and mobility issues
इस विषय के 11 टॉपिक में से 5 दिखाए गए हैं।सभी 11 टॉपिक देखें →
Important datesPending verification
2026 cycle
Latest confirmed cycle has concluded
Written Test Date: 2026-08-30
Next examination date has not yet been published in StudyBddy's verified official record. The date above is historical—not an upcoming deadline.
As checked on 24 August 2026, the IT-professionals application closes today. The written test on 30 August applies only to RG/14/26 and RG/15/26; RG/13/26 uses document scrutiny and interview. Confirm any same-day extension or corrigendum on RITES Careers before submitting.
Full published timeline3 completed · 0 awaiting dates⌄
Written Test Date
Completed2026-08-30
Application Deadline
Completed2026-08-24
Application Start Date
Completed2026-08-03
Historical cycle snapshot
| Year | Vacancy Number | Post | Application Window | Vacancies | Vacancy Numbers | Source |
|---|---|---|---|---|---|---|
| 2026 | RG/11/26 | Assistant Manager (Mechanical) | 2026-07-17 to 2026-08-17 | 24 | Not stated | Open ↗ |
| 2026 | Not stated | Not stated | Not stated | Not stated | RG/08/26 to RG/10/26 | Open ↗ |
| 2026 | RG/07/26 | Assistant (HR) | Not stated | Not stated | Not stated | Open ↗ |
| 2026 | RG/08-R1/25 | Assistant Manager (Finance) | Not stated | Not stated | Not stated | Open ↗ |
Job profile & salaryPending verification
| Engagement | Posting | Benefits |
|---|---|---|
| Regular appointment with one-year probation | Anywhere in India or abroad according to company requirements | DA, fixed/variable allowances, performance-related pay, medical facilities, HRA/lease accommodation, PF, gratuity and post-retirement medical scheme under company rules |
CutoffsPending verification
Previous-year papersPending verification
Books & study sourcesNot loaded
Official & trusted free resourcesPending verification
How to applyPending verification
- 1Open RITES Careers and select the exact vacancy number.
- 2Confirm degree, marks, post-qualification experience, work description, age and category against that PDF.
- 3Submit the online form, documents and fee by the stated deadline; preserve the generated invoice and application record.
- 4Track RITES Selection Schedule for written-test, admit-card, document-verification and interview notices.
FAQsPending verification
Do all RITES posts have a written test?
No. The current RG/13/26 DGM post is interview-only, while RG/14/26 and RG/15/26 use a written test followed by interview.
Can I prepare from one common RITES syllabus?
No. Select the vacancy number; RITES publishes different technical syllabi for different posts.
Final eligibility and dates are always subject to the latest official notification. Content marked “Pending verification” is not presented as verified advice.