SJVNL Various Posts

• Knowledge of English Language (30 marks) & Knowledge of Hindi Language (30 marks)

  7 टॉपिक

  • Reading Comprehension
  • Sentence Improvement
  • Phrase Replacement
  • Error Spotting/ Error Detection
  • Fill in the Blanks
  • Odd one out
  • Punctuation

• Computer Knowledge (20 marks)

  5 टॉपिक

  • MS Office i.e. Office, Excel, PowerPoint
  • Computer Hardware & Software
  • Computer Input & Output Devices
  • Computer Abbreviations & Acronyms
  • Internet

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Knowledge of English Language (30 marks) & Knowledge of Hindi Language (30 marks)

  7 टॉपिक

  • Reading Comprehension
  • Sentence Improvement
  • Phrase Replacement
  • Error Spotting/ Error Detection
  • Fill in the Blanks
  • Odd one out
  • Punctuation

• Computer Knowledge (20 marks)

  5 टॉपिक

  • MS Office i.e. Office, Excel, PowerPoint
  • Computer Hardware & Software
  • Computer Input & Output Devices
  • Computer Abbreviations & Acronyms
  • Internet

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• PART-A (80 marks)

  21 में से 7 टॉपिक

  • Aims & Objectives of Cooking
  • Kitchen Layout and Organisation
  • Equipment, Fuel and Tools used in Cookery
  • Ingredients: Shortenings, Raising Agents, Sugar, Milk products, Rice and Cereal, Vegetables and Fruits.
  • Preparation and Methods of Cooking
  • Preparation of Ingredients
  • Methods & Principles of Cooking Food – Roasting, Grilling, Frying, Baking, Boiling, Steaming.

• Basics of kitchen and food safety Etiquettes

  4 टॉपिक

  • Hygiene & Sanitation
  • Cleaning equipment
  • Cleaning methods – Care, cleaning and polishing of various surfaces
  • Cleaning of guest rooms and bath – daily, weekly and spring cleaning, etc.

इस विषय के 25 टॉपिक में से 11 दिखाए गए हैं।सभी 25 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• PART A (80 marks)

  14 में से 7 टॉपिक

  • Introduction to Trade
  • Safety Precautions and Hazards: General Safety, First Aid, 5S, Power Failure, etc.
  • Fitting, Hand Tools: Vices, Files, Hacksaw, Hammer, Chisels, Punches, Callipers, Divider, Try square, Measuring Instruments, Precession measuring instruments, gauges, Measuring and Checking instruments
  • Bench Grinder (Pedestal Grinder), Milling machine.
  • Lathe Machine: Types, Construction and Classification, Lathe Accessories and attachments, Lathe Cutting Tools, Lathe Operations, Calculation on Cutting speed, Feed, Time, Angle , Drilling, Reaming
  • Basic Concept of Engineering drawing, Thread types
  • Heat Treatment: Process and Methods etc.,

इस विषय के 14 टॉपिक में से 7 दिखाए गए हैं।सभी 14 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Financial Accounting

  6 टॉपिक

  • Basics of Accounting: Concepts and principles
  • Accounting Records: Journal, Ledger, and Trial Balance
  • Financial Statements of Companies, including classification of Assets, Liabilities, Income, and Expenditure; Capital vs. Revenue Expenditure
  • Depreciation — Basic understanding and methods of calculation
  • Inventory Valuation
  • Bank Reconciliation Statement

• Cost and Management Accounting

  3 टॉपिक

  • Understanding Cost: Material, Labour, and Overhead
  • Cost Sheet, Marginal Costing, and Break-even Analysis
  • Budgeting — Purpose and Types

• Basics of Financial Management

  4 टॉपिक

  • Time Value of Money
  • Working Capital — Concept and importance
  • Cash Management — Importance and basics
  • Capital Budgeting — Basic Concepts and Techniques

• Basics of Business Law

  3 टॉपिक

  • Indian Contract Act, 1872
  • Companies Act, 2013
  • Negotiable Instruments Act, 1881

• Taxation

  3 टॉपिक

  • Basic concepts of Income Tax — Residential status and heads of income
  • TDS — Concept, basic rules, applicable rates (overview), Form 16, and filing of returns
  • GST — Meaning, basic rules, types, tax invoice, input tax credit, and filing of returns

• Auditing

  3 टॉपिक

  • Basic Objectives and Types of Audit
  • Internal Check and Internal Control — Conceptual understanding
  • Vouching and Verification

• Indian Economy and Public Sector

  3 टॉपिक

  • Structure and role of Public Sector Enterprises
  • Basics of inflation and fiscal deficit
  • Government initiatives related to financial reforms

• Banking and Insurance

  3 टॉपिक

  • Basic banking operations — Savings Account, Current Account, Loans
  • Issue and receipt of cheques, payment processing through NEFT/RTGS/UPI
  • Principles of Insurance

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Electrician Theory

  31 में से 7 टॉपिक

  • Occupational Safety and Health
  • Conductor, semiconductors
  • Insulator and electric cables
  • Tools for an Electrician
  • Soldering and D.C theory
  • Basic Electricity
  • Electrical accessories

• Engineering Drawing

  14 में से 7 टॉपिक

  • Engineering drawing – Drawing instruments – Lines, Drawing of geometrical figures
  • Lettering and numbering, dimensioning
  • Drawing sheets, Freehand drawing
  • Presentation of engineering drawing – And Symbolic representation.
  • Construction of scales
  • Lettering and title block
  • Dimensioning practice – Construction of geometrical drawing figures, Drawing of solid shapes

• Workshop calculation and Science

  13 में से 6 टॉपिक

  • Units, Fraction, Square root
  • Ratio and proportion
  • Percentage, Material science
  • Mass, weight, and density
  • Speed and velocity, Work
  • Power and energy.

• Electrical Practical

  23 में से 6 टॉपिक

  • Trade safety and first aid
  • Tools, wire, and joints
  • Allied trades, Resistor, and capacitor
  • Alternating current (A.C.) circuit
  • Cell and battery, Magnetic field
  • Earthing and Semi-conductor diode.

इस विषय के 81 टॉपिक में से 26 दिखाए गए हैं।सभी 81 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Fitter Theory

  23 में से 6 टॉपिक

  • Trade introduction and safety precautions
  • Measurement and measuring instruments
  • Common hand tools
  • Marking and marking tools
  • Properties of metals
  • Drilling machine

• Engineering Drawing

  6 टॉपिक

  • Introduction to Engineering drawing
  • Drawing instruments, Lines
  • Drawing of geometrical figures
  • Lettering and numbering
  • Dimensioning, Projection
  • Conventional and symbolic representation.

• Workshop Calculation and Science

  4 टॉपिक

  • Units, Fraction, Square root
  • Ratio and proportion, Percentage
  • Heat and temperature, Basic electricity
  • Levers and simple machines

• Fitter practical

  17 में से 6 टॉपिक

  • Safety and precautions in a workshop
  • Hand tools and machining
  • Necessities of forging process
  • Miscellaneous sheet metal processes.
  • Welding, Drilling and boring
  • Threading operation

इस विषय के 50 टॉपिक में से 22 दिखाए गए हैं।सभी 50 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Introduction to Storekeeping

  3 टॉपिक

  • Role of a Storekeeper
  • Duties and Responsibilities
  • Ethics in Storekeeping

• Objectives and Importance of Storekeeping

  2 टॉपिक

  • Key Functions of Storekeeping
  • Essentials of Effective Storekeeping

• Storekeeping Documentation and Records

  11 में से 6 टॉपिक

  • Goods Received Note (GRN)
  • Goods Inspection Report.
  • Goods Issue Note
  • Goods Returned Note
  • Material Debit Note
  • Invoices and Invoice Stamps

• Inventory Management

  4 टॉपिक

  • Types of Inventory
  • Methods of Stock Valuation (FIFO, LIFO, Weighted Average)
  • Reordering Techniques and Economic Order Quantity (EOQ)
  • Inventory Auditing and Stock Verification

• Store Layout and Location Planning

  4 टॉपिक

  • Principles of Store Layout and Design
  • Factors Affecting Store Layout
  • Marking and Labelling Systems
  • Store Location Planning Methods

• Data and Information Management

  2 टॉपिक

  • Types of Data: Physical vs. Digital (Soft Copy) Importance of Accurate Record-Keeping
  • Introduction to Digital Inventory Systems

• Environmental Hazards and Safety

  3 टॉपिक

  • Storage Safety for Chemicals, Fuels, and Petroleum Products
  • Personal Protective Equipment (PPE) Usage
  • Spill Control and Hazardous Material Handling

• General Safety and Fire Prevention

  4 टॉपिक

  • Electrical Safety in Stores
  • Causes and Prevention of Fire
  • Types and Use of Fire Extinguishers
  • Emergency Procedures

• First Aid and Emergency Response

  2 टॉपिक

  • Basic First Aid Practices
  • Handling Injuries in Store Environment

• Types of Stores

  7 में से 6 टॉपिक

  • Raw Material Stores
  • Tool Stores
  • General Stores
  • Scrap Material Stores
  • Maintenance & Repair Stores
  • Finished Goods Stores

• Material Handling

  5 टॉपिक

  • Importance of Efficient Material Handling
  • Types of Material Handling Equipment
  • Manual
  • Power-Driven and Automated Systems
  • Safety in Material Handling

• Storage Methods and Materials Characteristics

  3 टॉपिक

  • Methods for Storing Various Materials (Solid, Liquid, Gaseous, Hazardous, Perishable, etc.)
  • Characteristics and Requirements of Storage Materials
  • FIFO/LIFO/Batch Control in Physical Storage

• Material Coding and Receiving Procedures

  3 टॉपिक

  • Importance and Methods of Material Coding
  • Sources of Material Receipt
  • Procedures and Protocols for Material Acceptance

• Computer Skills for Storekeeping

  5 टॉपिक

  • Basic Computer Knowledge and Applications
  • MS Office (e g. Excel, Word)
  • Operating Systems and File Management (Windows Explorer)
  • Introduction to Storekeeping Software (ERP, Inventory Modules)
  • Digital Stock Entry and Report Generation

इस विषय के 58 टॉपिक में से 52 दिखाए गए हैं।सभी 58 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Introduction

  5 टॉपिक

  • Introduction of surveying, types of surveying, use, application principal
  • Knowledge of different types of scales, determine of R.F & uses of scales.
  • Different types of projection views orthographic, sectional, isometric view.
  • Use & application of conventional signs & symbols.
  • Basic Knowledge of different types measurement units used in survey works.

• Chain Survey

  11 में से 6 टॉपिक

  • Uses of Chain/tape
  • testing of a chain & correction
  • Ranging (direct indirect)
  • Principle of chain survey, application
  • Terms used in chain survey
  • Offset, types of offsets, limit of offset

• Compass Survey

  5 टॉपिक

  • Basic terms used in compass survey
  • Instrument& it setting up
  • Conversion of bearing web to R.B.
  • Calculation of included angle from bearing local attraction, magnetic declination and true bearing, closing error.
  • Adjustment of closing error, precaution in using prismatic compass.

• Plane table survey

  9 में से 6 टॉपिक

  • principles, merits & demerits Instrument used in plane table survey setting up the plane table. (centering, levelling, orientation)
  • Methods of plane table survey (radiation, intersection, section, traversing)
  • Traversing using the theodolite (closed &open)
  • traverse computation
  • determination of consecutive coordinates, independent co-ordinate
  • checking & balancing of traverse

• Levelling

  7 में से 6 टॉपिक

  • Introduction to levelling
  • Types of levelling instruments
  • Technical terms used in levelling
  • Temporary &permanent adjustment
  • Different types of levelling Entry of level book (Reduced level calculation method) Curvature & refraction effect sensitivity of bubble tube.
  • Common error and their elimination.

• Tachometry

  3 टॉपिक

  • Introduction of tachometry & terms use advantages and disadvantages
  • Tachometric constants & its determination.
  • Determination of horizontal & vertical distances by various methods.

• Contouring

  6 टॉपिक

  • contour interval selection of contour interval
  • characteristics of contour
  • uses of contour contouring by various method.
  • Interpolation of contour by various methods
  • drawing of contours
  • computation of volume establishment of gradient by Abney level.

• Curves

  3 टॉपिक

  • Purpose, Types of curves — simple, compound, reverse, transition, vertical.
  • Elements of simple curve, computation of elements of simple curve.
  • Various methods for setting out simple, compound, reverse, transition& vertical curve.

• Modern survey instruments

  3 टॉपिक

  • Parts of Total station
  • temporary adjustment of T.S
  • working procedure of T.S.

• Cadastral survey

  4 टॉपिक

  • Cadastral map
  • term used in cadastral survey
  • preliminary knowledge for prepare a site plan.
  • Calculation of area by digital planimeter.

• Topographical Map

  6 टॉपिक

  • Details knowledge for preparation of topographical map to map the terrain and surface features of the project area, including rivers, mountains, and valleys.
  • Details knowledge for preparation of cadastral map.
  • Details knowledge for preparation of layout plan of Civil Engineering projects.
  • Importance of cartographic projection.
  • Uses of various types of cartographic projection for mapping.
  • Details knowledge for preparation of a road project.

• Application of Software

  6 टॉपिक

  • Application of Computers & Software in Surveying for generation of Topographical plan, Contour, cross section etc. (such as AutoCAD, LISCAD etc.)
  • Introduction of GIS& GPS.
  • Elements of GPS/DGPS.
  • Observation principles.
  • Sources of error & handling of error in GPS.
  • Various type of GPS application.

• Hydrographic survey

  5 टॉपिक

  • use, practice various methods of water depth measurement process, flow velocity measurement & determination of cross- sectional area of river.
  • Handling of echosounder, current meter.
  • Basic terms used in transmission line survey, justification criteria for constructing new line, marking process of tentative alignment, selection process of a good alignment.
  • Process of detail survey & final location survey.
  • Use of sag template, Various type of tower, construction of tower foundation.

इस विषय के 73 टॉपिक में से 64 दिखाए गए हैं।सभी 73 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• Welder Theory

  106 टॉपिक

  • Importance of trade Training.
  • General discipline in the Institute
  • Elementary First Aid.
  • Importance of Welding in Industry
  • Safety precautions in Shielded Metal Arc Welding, and Oxyacetylene Welding and Cutting.
  • Introduction and definition of welding.
  • Arc and Gas Welding Equipment’s, tools and accessories.
  • Various Welding Processes and its applications.
  • Arc and Gas Welding terms and definitions.
  • Different process of metal joining methods: Bolting, riveting, soldering, brazing, seaming etc.
  • Types of welding joints and its applications.
  • Edge preparation and fit up for different thickness.
  • Surface Cleaning.
  • Basic electricity applicable to arc welding and related electrical terms &definitions.
  • Heat and temperature and its terms related to welding
  • Principle of arc welding. And characteristics of arc.
  • Common gases used for welding & cutting, flame temperatures and uses.
  • Chemistry of oxy-acetylene flame.
  • Types of oxy-acetylene flames and uses.
  • Oxy-Acetylene Cutting Equipment principle, parameters and application.
  • Arc welding power sources: Transformer, Motor Generator set, Rectifier and Inverter type welding machines and its care & maintenance.
  • Advantages and disadvantages of A.C. and D.C. welding machines
  • Welding positions as per EN & ASME: flat, horizontal, vertical and overhead position.
  • Weld slope and rotation.
  • Welding symbols as per BIS & AWS.
  • Arc length – types – effects of arc length.
  • Polarity: Types and applications.
  • Weld quality inspection, common welding mistakes and appearance of good and defective welds
  • Weld gauges & its uses.
  • Calcium carbide properties and uses.
  • Acetylene gas properties and generating methods.
  • Acetylene gas Purifier, Hydraulic back pressure valve and Flash back arrestor
  • Oxygen gas and its properties
  • Production of oxygen by Air liquefaction.
  • Charging process of oxygen and acetylene gases
  • Oxygen and Dissolved Acetylene gas cylinders and Color coding for different gas cylinders.
  • Gas regulators, types and uses.
  • Oxy acetylene gas welding Systems (Low pressure and High pressure).
  • Difference between gas welding blow pipe (LP & HP) and gas cutting blow pipe
  • Gas welding techniques. Rightward and Leftward techniques.
  • Arc blow – causes and methods of controlling.
  • Distortion in arc & gas welding and methods employed to minimize distortion
  • Arc Welding defects, causes and Remedies.
  • Specification of pipes, various types of pipe joints, pipe welding all positions, and procedure.
  • Difference between pipe welding and plate welding.
  • Pipe development for Elbow joint, “T” joint, Y joint and branch joint
  • Manifold system
  • Gas welding filler rods, specifications and sizes.
  • Gas welding fluxes – types and functions.
  • Gas Brazing & Soldering: principles, types fluxes & uses
  • Gas welding defects, causes and remedies.
  • Electrode: types, functions of flux, coating factor, sizes of electrode Coding of electrode as per BIS, AWS
  • Effects of moisture pick up.
  • Storage and baking of electrodes.
  • Special purpose electrodes and their applications.
  • Weldability of metals, importance of pre-heating, post heating and maintenance of inter pass temperature.
  • Classification of steel.
  • Welding of low, medium and high carbon steel and alloy steels.
  • Effects of alloying elements on steel
  • Stainless steel types- weld decay and weldability.
  • Brass – types – properties and welding methods.
  • Copper – types – properties and welding methods.
  • Aluminum and its alloys, properties and weldability, Welding methods
  • Arc cutting & gouging, Cast iron and its properties types.
  • Welding methods of cast iron.
  • Types of Inspection methods
  • Classification of destructive and NDT methods
  • Welding economics and Cost estimation.
  • Safety precautions in Gas Metal Arc Welding and Gas Tungsten Arc welding.
  • Introduction to GMAW - equipment – accessories.
  • Various other names of the process. (MIG/MAG/CO2 welding.)
  • Modes of metal transfer – dip or short-circuiting transfer, spray transfer (free flight transfer) and globular transfer (intermittent transfer) and Pulsed metal transfer.
  • Wire feed system – types – care and maintenance.
  • Welding wires used in GMAW, standard diameter and codification as per AWS.
  • Types of shielding gases and gas mixtures used in GMAW and its applications.
  • Flux cored arc welding – description, advantage, welding wires, coding as per AWS.
  • Heat input and techniques of controlling heat input during welding.
  • Heat distribution and effect of faster cooling.
  • Pre-heating & Post Weld Heat Treatment
  • Use of temperature indicating crayons.
  • Submerged arc welding process –principles, equipment, advantages and limitations.
  • Electro slag and Electro gas welding processes–principles, equipment’s, advantages and limitations.
  • Thermit welding process- types, principles, equipment’s, Thermit mixture types and applications.
  • Use of backing strips and backing bars.
  • GTAW process - brief description.
  • Difference between AC and DC welding, equipment’s, polarities and applications.
  • Various other names of the process (TIG, Argon arc)
  • Power sources for GTAW - AC &DC
  • Tungsten electrodes –types & uses, sizes and preparation
  • GTAW Torches- types, parts and their functions
  • GTAW filler rods and selection criteria.
  • Edge preparation and fit up.
  • GTAW parameters for welding of different thickness of metals
  • Pulsed TIG welding - brief description, pulse parameters slope up and slope down.
  • Friction welding process equipment and application
  • Laser beam welding (LBW)and Electron beam welding (EBW)
  • Plasma Arc Welding (PAW) and cutting (PAC) process – equipment’s and principles of operation.
  • Types of Plasma arc, advantages and applications.
  • Resistance welding process -types, principles, power sources and welding parameters.
  • Applications and limitations.
  • Metalizing – types of metalizing principles.
  • Manual Oxy – acetylene powder coating process principles of operation and applications.
  • Reading of assembly drawing
  • Welding Procedure Specification (WPS) and Procedure Qualification Record ( PQR).
  • Hard facing/ surfacing necessity, surface preparation, various hard facing alloys and advantages of hard facing.
  • Plastic welding machine with hot air gun and plastic material: Polypropylene (PP) Polyethylene (PE) Polyvinylchloride (PVC).

• Engineering Drawing

  10 टॉपिक

  • Introduction to Engineering Drawing and Drawing Instruments; Conventions Sizes and layout of drawing sheets Title Block, its position and content Drawing Instrument
  • Free hand drawing of; Geometrical figures and blocks with dimension Transferring measurement from the given object to the free hand sketches.
  • Free hand drawing of hand tools and measuring tools.
  • Lines Types and applications in drawing
  • Drawing of Geometrical figures; Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
  • Lettering & Numbering – Single Stroke, double stroke, inclined
  • Reading of dimension and Dimensioning Practice.
  • Reading of fabrication drawing, sectional view of different types of welding Joints.
  • Sectional view of different pipe joints
  • Symbolic representation different symbols used in the related trades Reading of Job Drawing of related trades.

• Workshop calculation and Science

  7 टॉपिक

  • Unit, Fractions
  • Square root, Ratio and Proportions, Percentage
  • Material Science
  • Mass, Weight, Volume and Density
  • Heat & Temperature and Pressure
  • Basic Electricity
  • Mensuration – Trigonometry

इस विषय के सभी 123 टॉपिक दिखाए गए हैं।कम टॉपिक दिखाएँ

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)

• PART-A (80 marks)

  16 में से 6 टॉपिक

  • Various Sections of the Motor Vehicles Act, 1939 amended from time to time
  • Licensing of Drivers of Motor Vehicles
  • Registration of Motor Vehicles
  • Offence, Penalties and Procedure
  • Accident Claims
  • Traffic Rules and signages

• Understanding Signals

  4 टॉपिक

  • Traffic Police hand signals
  • Hand signals while driving
  • Traffic light signals
  • Road map reading

• Fitness to drive

  3 टॉपिक

  • First aid kit
  • Good health & Road safety
  • Driving under influence of drugs/liquors

• Difficult driving condition

  7 में से 6 टॉपिक

  • Driving on wet surface
  • Driving in fog
  • Driving in snow
  • Night driving
  • Running on pavement
  • Brake failure

इस विषय के 30 टॉपिक में से 19 दिखाए गए हैं।सभी 30 टॉपिक देखें →

• PART-B (20 marks)

  4 टॉपिक

  • Logical Reasoning (5 questions)
  • Quantitative Aptitude (5 questions)
  • English (5 questions)
  • General Knowledge/ Awareness (5 questions)