लाइव डेटा थोड़ी देर के लिए अनुपलब्ध है — यह पृष्ठ इस परीक्षा के विवरण की नवीनतम प्रकाशित प्रति दिखा रहा है।
Engineering & TechnicalNBCC Various Posts
National Buildings Construction Corporation
- क्षेत्र
- Engineering & Technical
- स्तर
- राष्ट्रीय
- प्रकार
- सरकारी
- आवेदन बंद होने की तारीख
- घोषित होना बाकी
आपकी प्रोफ़ाइल के अनुसार पात्रता
साइन इन आवश्यकNBCC Various Posts के लिए अपनी पात्रता जाँचने हेतु साइन इन करें
व्यक्तिगत परिणाम और उसके स्पष्ट कारण पाने के लिए अपनी निजी छात्र प्रोफ़ाइल का उपयोग करें।
यह प्रारंभिक प्रोफ़ाइल मिलान है। आवेदन से पहले नवीनतम आधिकारिक सूचना में हर नियम की पुष्टि करें।
परीक्षा सारांश
अवलोकन
आयोजक संस्था
National Buildings Construction Corporation
आपको क्या मिलेगा
Project Manager, Site Engineer, Management Trainee
नवीनतम सामग्री चक्र
2026
Cracked NBCC Various Posts? Mentor the next batch.
Apply with the exam you cleared — our team verifies every credential against official results before a mentor appears.
Apply to become a mentorWorth preparing alongside
We cannot line NBCC Various Posts up against other exams yet
This does not mean NBCC Various Posts shares nothing with the exams you are preparing for — only that we have not loaded a chapter-by-chapter syllabus we can compare against, so we will not guess. We compare 0 exams whose official syllabus we have traced to the conducting body, and this one is not among them yet.
Plan with confidence
Complete exam guide
Eligibility, pattern, syllabus, dates and official resources in one structured view.
EligibilityPending verification
Nationality
Only Indian Nationals are eligible to apply.
Exam patternPending verification
Qualification pathway
Clear each applicable stage in order
Final selection or admission still depends on the published cutoff or merit list and any applicable counselling, document, medical, preference and vacancy rules.
Selection sequence
- 1
Computer Based Test (CBT)
If applicablePosts at S.No. 02-08 and 10-12 (grades E-3/E-2/E-1 and S-3). NBCC's published scheme of examination is headed 'FOR POSTS AT S.NO. 02 - 08 & 10-12'.
- 2
Skill Test
If applicableE-0 posts (S.No. 09, Graduate Assistant), followed by Personal Interview.
- 3
Personal Interview
If applicableE-6 posts (interview only), E-3/E-2/E-1 posts (after the CBT) and E-0 posts (after the skill test). S-3 Junior Engineer posts are selected on the CBT alone.
Paper and stage details
What each stage contains
Computer Based Test (CBT)
Computer Based TestQuestions
Not stated
Maximum marks
Not stated
Duration
Not stated
2026 section structure
| Question type | Per subject | Full marks | Negative marks | Partial marks |
|---|---|---|---|---|
| + | None | No | ||
| + | None | No | ||
| + | None | No |
Skill Test
Skill TestQuestions
Not stated
Maximum marks
Not stated
Duration
Not stated
Personal Interview
InterviewQuestions
Not stated
Maximum marks
Not stated
Duration
Not stated
SyllabusPending verification
सभी 12 विषय और 83 अध्याय शामिल हैं — कुल 1,062 टॉपिक में से 420 यहाँ दिखाए गए हैं।कुछ भी हटाया नहीं गया है। हर विषय में उसकी पूरी टॉपिक सूची का लिंक मौजूद है।
MANAGER (ARCHITECTURE & PLANNING)
1: Architecture, Planning and Design
- Architectural Graphics
- Visual composition in 2D and 3D
- Computer application in CAdd, BIM, Photo shops, 3D Max etc in Architecture and Planning
2: History and Contemporary Architecture
- Principles of Art and Architecture
- World History of Architecture: Egyptian, Greco-Roman classical period, Byzantine, Gothic, Renaissance, Baroque-Rococo, etc.
- Recent trends in Contemporary Architecture: Art nouveau, Art Deco, Eclecticism, International styles, Post Modernism, Deconstruction in architecture, etc.
3: Building Construction and Structural systems
- Building construction techniques, methods and details
- Building systems and prefabrication of building elements
- Principles of Modular Coordination
4: Construction and Management
- Estimation and Specification
- Professional practice and ethics
- Form and Structure
5: Planning process
- Salient concepts, theories and principles of urban planning
- concepts of cities -Eco-City, Smart City
- Concepts and theories by trendsetting planners and designers
6: Housing
- Housing typologies
- Concepts, principles and examples of neighborhood
- Residential densities
7: Environmental Planning and Design
- Natural and man-made ecosystem
- Ecological principles
- Environmental considerations in Planning and design
8: Urban Design, landscape and Conservation
- Historical and modern examples of urban design
- Elements of urban built environment urban form, spaces, structure, pattern, fabric, texture, grain etc.
- Concepts and theories of urban design
9: Services and Infrastructure
- Fire fighting Systems
- Building Safety and Security systems
- Building Management Systems
10: Building Services and Sustainability
- Solar architecture
- Thermal, visual and acoustic comfort in built environments
- Natural and Mechanical ventilation in buildings
11: Codes And Standards
- Knowledge of latest National Building Code of India (NBC)- 2016
- CPWD specifications
- CPWD Plinth Area Rates (PAR)-2025 & Delhi Schedule of Rate (DSR), manuals and basic knowledge of NBCC Consultant GCC (General Conditions of Contract) -2026 and standards (refer to the link: https://nbccindia.in/webEnglish/Tenders)
इस विषय के 85 टॉपिक में से 33 दिखाए गए हैं।सभी 85 टॉपिक देखें →
Deputy Manager (Company Secretary)
Deputy Manager (Company Secretary)
- The Companies Act, 2013
- SEBI(LODR) Regulations,2015 and
- Financial Management
AM(CORPORATE COMMUNICATION)
Section A: Public Relations & Corporate Communication Fundamentals
- Concept, evolution and scope of Public Relations
- PR functions in Government, PSU and Corporate sectors
- Stakeholder/Publics: Internal & External
Section B: Media Relations & Communication Practice
- Media ecosystem: Print, Electronic, Digital, Social
- Media engagement strategies (press releases, briefings, interviews, podcasts)
- Organising press conferences, media tours, VVIP visits
Section C: Writing & Content Development
- News writing: Structure, news values, inverted pyramid
- Types of writing: Press releases, speeches, features, reports
- Corporate storytelling & success stories
Section D: Digital Media & Online Reputation
- Social media platforms (Facebook, X, Instagram, LinkedIn, etc.)
- Digital campaigns and content strategy
Section E: Advertising & Branding
- Fundamentals of advertising
- Types and functions of advertising
- Media planning and media mix
Section F: Communication Theories & Models
- Models: Aristotle, Lasswell, Shannon-Weaver, Schramm, etc.
- Agenda Setting
- Uses & Gratification
Section G: Media Laws & Ethics (India)
- Freedom of Speech and Expression, Article 19 of Indian Constitution
- The Copyright Act, 1971
- The Press Council Act – 1978
Section H: Media Production & Visual Communication (Basic Awareness)
- Photojournalism basics (selection, captions)
- Video production fundamentals (corporate films, documentaries)
- Visual storytelling
Section I: Exhibitions & Event Management
- Space: Bare space, Shell Scheme
- Design and Layout of Exhibition
- Elements: Display panels, Diorama, Flooring
Section J: Content Designing and Marketing Collaterals
- Design/Editing Software knowledge- Adobe PhotoShop, Adobe Illustrator, Corel Draw, FCP, Adobe premiere pro, Canva etc.
- Knowledge of Paper Types, Paper sizes, Paper GSM and their usage in publications
Section K: Photography & Videography
- Familiarization of different Cameras
- Working with Digital SLR Camera
- Experiments with depth of field - White balance
इस विषय के 83 टॉपिक में से 31 दिखाए गए हैं।सभी 83 टॉपिक देखें →
राजभाषा
राजभाषा
- संघ की राजभाषा नीति, संवैधानिक प्रावधान, राष्ट्रपति के आदेश 1960, राजभाषा अधिनियम, 1963, राजभाषा संकल्प,1968, राजभाषा नियम, 1976, राजभाषा विभाग, गृह मंत्रालय द्वारा समय-समय पर जारी विभिन्न आदेश एवं वार्षिक राजभाषा कार्यक्रम और उनका कार्यान्वयन सबधि ज्ञान।
- राजभाषा हिंदी के संवर्धन हेतु कार्यरत सरकारी संस्थाएं, समितियां एवं योजनाएं सबधित जानकारी।
- हिंदी भाषा एवं साहित्य और हिंदी के प्रमुख साहित्यकार एवं कृतियां ई सबधि जानकारी।
इस विषय के 8 टॉपिक में से 3 दिखाए गए हैं।सभी 8 टॉपिक देखें →
PROFESSIONAL KNOWLEDGE (HR)
1. Principles & Practices of Management
- Evolution of Management Thought
- Contributions of Taylor, Fayol, Elton Mayo, etc.
- Functions of Management
2. Human Resource Management (HRM)
- HR Planning
- Job Analysis & Job Design
- Recruitment & Selection
3. Organisational Behaviour (OB)
- Personality, Perception, Attitudes
- Motivation Theories
- Leadership Theories
4. Human Resource Development (HRD)
- HRD Concepts & Systems
- Training Need Analysis
- Learning Theories
5. Industrial Relations (IR)
- Concept & Scope of IR
- Trade Unions
- Collective Bargaining
6. Labour Laws & Compliances
- Key provisions of important labour laws
- Principles of Natural Justice
8. Contemporary & Emerging HR Topics
- HR Analytics
- Digital HR & HRIS
- Employee Engagement
इस विषय के 38 टॉपिक में से 20 दिखाए गए हैं।सभी 38 टॉपिक देखें →
SR. PROJECT EXECUTIVE (CIVIL)
1. SURVEYING
- Principles of surveying
- measurement of distance
- chain surveying
2. SITE INVESTIGATION AND SUB- SOIL EXPLORATION
- Methods of sub soil exploration
- Open test pit
- Tube Test pit
3. COMPACTION OF SOIL
- Laboratory compaction tests
- standard proctor Compaction, tests, modified proctor Test
- Theory of Compaction
4. CONSTRUCTION OF FOUNDATIONS
- Soil classification
- Bearing capacity
- Determination of bearing capacity
5.CEMENT CONCRETE AND REINFORCED CEMENT CONCRETE CONSTRUCTION
- Properties of cement
- Principles of setting and hardening of cement
- Fine Aggregate
6. RCC DESIGN
- RCC beams-flexural strength
- shear strength
- bond strength
7. ENVIRONMENTAL ENGINEERING
- Introduction: Importance of water supply
- need for protected water supply
- objectives of water supply system
8. TRANSPORTATION ENGINEERING
- Highways: Importance of highway transportation
- IRC classification of roads
- Indian Road congress
9. ESTIMATING AND COSTING
- Introduction: Introduction to quantity surveying and its importance
- Duties of quantity surveyor Types of estimates
- preliminary estimates
10. CONSTRUCTION MANAGEMENT AND ACCOUNTS
- Basic Principles of Management: Management principle
- planning
- organizing
11. CAD IN CIVIL ENGINEERING PRACTICE
- Introduction to Auto Cad
- definition of various commands used
- Simple exercises using Auto Cad commands
13. Standards & Codes
- Knowledge of latest National Building Code of India (NBC)- 2016
- CPWD specifications
- CPWD Plinth Area Rates (PAR)-2025 & Delhi Schedule of Rate (DSR), manuals and basic knowledge of NBCC GCC for Consultancy and Contracting 2026 and standards (refer to the link: https://nbccindia.in/webEnglish/Tenders)
इस विषय के 438 टॉपिक में से 36 दिखाए गए हैं।सभी 438 टॉपिक देखें →
Assistant Manager (PHE)
Fluid Mechanics & Hydraulics
- Properties of fluids
- fluid statics
- Fluid kinematics and dynamics
Water Supply & Public health Engineering
- Population forecasting and water demand analysis
- Sources of water supply and intake structures
- Water treatment processes
Waste water Engineering
- Sewerage systems (types and design criteria)
- Design of sewer networks and appurtenances
- Stormwater drainage systems
Environmental Engineering & Management
- Air pollution: sources, effects, control measures
- Solid waste management: collection, processing, disposal
- Environmental Impact Assessment (EIA)
Design Standards & Codes
- CPHEEO Manual (Water Supply & Sewerage)
- BIS (IS codes) related to water and wastewater
- CPCB/MoEF guidelines
इस विषय के 35 टॉपिक में से 15 दिखाए गए हैं।सभी 35 टॉपिक देखें →
JUNIOR ENGINEER (CIVIL)
Building Materials
- Physical and Chemical properties
- classification
- standard tests
- uses and manufacture/quarrying of materials e.g. building stones
- silicate based materials
- cement (Portland)
- asbestos products
- timber and wood based products
- laminates
- bituminous materials
- paints
- varnishes
Estimating, Costing and Valuation
- estimate
- glossary of technical terms
- analysis of rates
- methods and unit of measurement
- Items of work – earthwork
- Brick work (Modular & Traditional bricks)
- RCC work
- Shuttering
- Timber work
- Painting
- Flooring
- Plastering
- Boundary wall
- Brick building
- Water Tank
- Septic tank
- Bar bending schedule
- Centre line method
- Mid-section formula
- Trapezodial formula
- Simpson's rule
- Cost estimate of Septic tank
- flexible pavements
- Tube well
- isolates and combined footings
- Steel Truss
- Piles and pile-caps
- Valuation – Value and cost
- scrap value
- salvage value
- assessed value
- sinking fund
- depreciation and obsolescence
- methods of valuation
Surveying
- Principles of surveying
- measurement of distance
- chain surveying
- working of prismatic compass
- compass traversing
- bearings
- local attraction
- plane table surveying
- theodolite traversing
- adjustment of theodolite
- Levelling
- Definition of terms used in levelling
- contouring
- curvature and refraction corrections
- temporary and permanent adjustments of dumpy level
- methods of contouring
- uses of contour map
- tachometric survey
- curve setting
- earth work calculation
- advanced surveying equipment
Soil Mechanics
- Origin of soil
- phase diagram
- Definitions-void ratio
- porosity
- degree of saturation
- water content
- specific gravity of soil grains
- unit weights
- density index and interrelationship of different parameters
- Grain size distribution curves and their uses
- Index properties of soils
- Atterberg's limits
- ISI soil classification and plasticity chart
- Permeability of soil
- coefficient of permeability
- determination of coefficient of permeability
- Unconfined and confined aquifers
- effective stress
- quick sand
- consolidation of soils
- Principles of consolidation
- degree of consolidation
- pre-consolidation pressure
- normally consolidated soil
- e-log p curve
- computation of ultimate settlement
- Shear strength of soils
- direct shear test
- Vane shear test
- Triaxial test
- Soil compaction
- Laboratory compaction test
- Maximum dry density and optimum moisture content
- earth pressure theories
- active and passive earth pressures
- Bearing capacity of soils
- plate load test
- standard penetration test
Hydraulics
- Fluid properties
- hydrostatics
- measurements of flow
- Bernoulli's theorem and its application
- flow through pipes
- flow in open channels
- weirs
- flumes
- spillways
- pumps and turbines
Irrigation Engineering
- Definition
- necessity
- benefits
- types and methods of irrigation
- Hydrology – Measurement of rainfall
- run off coefficient
- rain gauge
- losses from precipitation – evaporation
- infiltration
- Water requirement of crops
- duty
- delta and base period
- Kharif and Rabi Crops
- Command area
- Time factor
- Crop ratio
- Overlap allowance
- Irrigation efficiencies
- Different type of canals
- types of canal irrigation
- loss of water in canals
- Canal lining – types and advantages
- Shallow and deep to wells
- yield from a well
- Weir and barrage
- Failure of weirs and permeable foundation
- Slit and Scour
- Kennedy's theory of critical velocity
- Lacey's theory of uniform flow
- Definition of flood
- causes and effects
- methods of flood control
- water logging
- preventive measure
- Land reclamation
- Characteristics of affecting fertility of soils
- purposes
- methods
- description of land and reclamation processes
- Major irrigation projects in India
Transportation Engineering
- Highway Engineering – cross sectional elements
- geometric design
- types of pavements
- pavement materials – aggregates and bitumen
- different tests
- Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM)
- Gravel Road
- Bituminous construction
- Rigid pavement joint
- pavement maintenance
- Highway drainage
- Railway Engineering- Components of permanent way – sleepers
- ballast
- fixtures and fastening
- track geometry
- points and crossings
- track junction
- stations and yards
- Traffic Engineering – Different traffic survey
- speed-flow-density and their interrelationships
- intersections and interchanges
- traffic signals
- traffic operation
- traffic signs and markings
- road safety
Environmental Engineering
- Quality of water
- source of water supply
- purification of water
- distribution of water
- need of sanitation
- sewerage systems
- circular sewer
- oval sewer
- sewer appurtenances
- sewage treatments
- Surface water drainage
- Solid waste management – types, effects, engineered management system
- Air pollution – pollutants, causes, effects, control
- Noise pollution – cause, health effects, control
Concrete Technology
- Properties
- Advantages and uses of concrete
- cement aggregates
- importance of water quality
- water cement ratio
- workability
- mix design
- storage
- batching
- mixing
- placement
- compaction
- finishing and curing of concrete
- quality control of concrete
- hot weather and cold weather concreting
- repair and maintenance of concrete structures
RCC Design
- RCC beams-flexural strength
- shear strength
- bond strength
- design of singly reinforced and double reinforced beams
- cantilever beams
- T-beams
- lintels
- One way and two way slabs
- isolated footings
- Reinforced brick works
- columns
- staircases
- retaining wall
- water tanks (RCC design questions may be based on both Limit State and Working Stress methods)
Standards & Codes
- Knowledge of latest National Building Code of India (NBC)- 2016
- CPWD specifications
- CPWD Plinth Area Rates (PAR)-2025 & Delhi Schedule of Rate (DSR), manuals and basic knowledge of NBCC GCC for Consultancy and Contracting 2026 and standards (refer to the link: https://nbccindia.in/webEnglish/Tenders)
Steel Design
- Steel design and construction of steel columns
- beams roof trusses plate girders
इस विषय के सभी 229 टॉपिक दिखाए गए हैं।कम टॉपिक दिखाएँ
JUNIOR ENGINEER (ELECTRICAL)
Basic Concepts
- Concepts of resistance, inductance, capacitance, and various factors affecting them
- Concepts of current, voltage, power, energy and their units
Circuit law
- Kirchhoff's law
- Simple Circuit solution using network theorems
Magnetic Circuit
- Concepts of flux
- mmf
- reluctance
AC Fundamentals
- Instantaneous, peak, R.M.S. and average values of alternating waves
- Representation of sinusoidal wave form
- simple series and parallel AC Circuits consisting of R.L. and C
Measurement and measuring instruments
- Measurement of power (1 phase and 3 phase, both active and re-active) and energy
- 2 wattmeter method of 3 phase power measurement
- Measurement of frequency and phase angle
Electrical Machines
- (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors
- Method of braking motor, Losses and efficiency of D.C. Machines
- (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency
Fractional Kilowatt Motors and Single Phase Induction Motors
- Characteristics and applications
Synchronous Machines
- Generation of 3-phase e.m.f. armature reaction
- voltage regulation
- parallel operation of two alternators
Generation, Transmission and Distribution
- Different types of power stations
- Load factor
- diversity factor
Estimation and costing
- Estimation of lighting scheme
- electric installation of machines and relevant IE rules
Utilization of Electrical Energy
- Illumination
- Electric heating
Basic Electronics
- Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET
- Simple circuits using these devices
Standards & Codes
- Knowledge of latest National Building Code of India (NBC)- 2016
- CPWD specifications
इस विषय के 80 टॉपिक में से 31 दिखाए गए हैं।सभी 80 टॉपिक देखें →
JE (Mechanical)
Theory of Machines and Machine Design
- Concept of simple machine
- Four bar linkage and link motion
Engineering Mechanics and Strength of Materials
- Equilibrium of Forces
- Law of motion
Properties of Pure Substances
- p-v & P-T diagrams of pure substance like H2O
- Introduction of steam table with respect to steam generation process
1st Law of Thermodynamics
- Definition of stored energy & internal energy
- 1st Law of Thermodynamics of cyclic process
2nd Law of Thermodynamics
- Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator
- Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators
Air standard Cycles for IC engines
- Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency
- Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency
Rankine cycle of steam
- Simple Rankine cycle plot on P-V, T-S, h-s planes
- Rankine cycle efficiency with & without pump work
Properties & Classification of Fluid
- ideal & real fiuids
- Newton's law of viscosity
Fluid Statics
- Pressure at a point
Standards & Codes
- Knowledge of latest National Building Code of India (NBC)- 2016
- CPWD specifications
इस विषय के 63 टॉपिक में से 19 दिखाए गए हैं।सभी 63 टॉपिक देखें →
General Intelligence and Logical Reasoning & Quantitative Aptitude
आधिकारिक पाठ्यक्रम के मानकीकरण तक टॉपिक प्रतीक्षित हैं।
General English
आधिकारिक पाठ्यक्रम के मानकीकरण तक टॉपिक प्रतीक्षित हैं।
Important datesPending verification
2026 cycle
Latest confirmed cycle has concluded
Reopened Window To: 2026-04-17
Next examination date has not yet been published in StudyBddy's verified official record. The date above is historical—not an upcoming deadline.
Full published timeline5 completed · 0 awaiting dates⌄
Reopened Window To
Completed2026-04-17
Reopened Window From
Completed2026-04-13
Online Registration Closes
Completed2026-04-05
Online Registration Opens
Completed2026-03-06
Window Advertisement Published
Completed2026-01-20
Job profile & salaryPending verification
Employer
NBCC (India) Limited, a Schedule 'A' Navratna CPSE under the Ministry of Housing and Urban Affairs, with PAN-India and overseas operations in Project Management Consultancy (including Re-Development), Real Estate Development, EPC Contracting and Smart City Projects.
Entry Grades
The advertisement covers E-6 (General Manager), E-3 (Manager), E-2 (Deputy Manager), E-1 (Assistant Manager / Sr. Project Executive), E-0 (Graduate Assistant) and S-3 (Junior Engineer) posts.
CutoffsNot loaded
Previous-year papersPending verification
Books & study sourcesNot loaded
Official & trusted free resourcesPending verification
How to applyPending verification
- 1Read the GENERAL INSTRUCTIONS in Advt. No. 01/2026 before filling the online application form.
- 2Keep ready a scanned passport size photograph (40 KB to 100 KB) and signature in jpg/jpeg format (20 KB to 50 KB).
- 3Keep ready the latest OBC (NCL)/EWS/SC/ST/PWD/ESM certificate as applicable (100 KB to 300 KB).
- 4Keep ready the Matriculation/Secondary certificate as proof of date of birth.
- 5Keep ready all pass certificates and mark sheets of the essential educational qualifications, and of other qualifications if any.
- 6Complete the form; where a fee applies the candidate is automatically redirected to make the online payment.
FAQsPending verification
Does NBCC recruit on GATE scores?
No. Advt. No. 01/2026 sets out NBCC's own selection route - Personal Interview at E-6, Computer Based Test plus Personal Interview at E-3/E-2/E-1, Skill Test plus Personal Interview at E-0, and Computer Based Test alone at S-3. NBCC publishes its own scheme of examination and its own post-wise syllabus. GATE does not appear anywhere in the advertisement.
What does the NBCC Computer Based Test look like?
NBCC's published scheme for the posts at S.No. 02-08 and 10-12 has three sections: Knowledge of Discipline (Core Area) 90 questions, General Intelligence and Logical Reasoning & Quantitative Aptitude 20 questions (10 plus 10), and General English 10 questions, for a total of 120. NBCC has not published a duration or a negative-marking rule for it.
Is there one eligibility rule for all NBCC posts?
No. Advt. No. 01/2026 covers twelve posts with different upper age limits (54 years at the top down to 28 years for Junior Engineers), different essential qualifications and different experience requirements. The advertisement is the document that settles eligibility for a particular post.
How much is the application fee?
Rs. 1000/- for all posts under Advt. No. 01/2026, payable online by debit card, credit card or net-banking. SC, ST, PWD and Departmental candidates are exempted.
Can I still apply to Advt. No. 01/2026?
No. Online registration ran from 06.03.2026 (10:00 hrs) to 05.04.2026 (17:00 hrs), and NBCC's public notice reopened the portal for posts 2 to 8 and 10 to 12 from 13 April 2026 to 17 April 2026. Both windows have closed. Watch the Career @ NBCC page for the CBT notice and for the next advertisement.
How do I know a NBCC vacancy notice is genuine?
NBCC's careers page warns that fraudulent websites circulate fictitious vacancy announcements and states that all genuine NBCC vacancies are announced on the official website www.nbccindia.in. NBCC also states that it does not solicit money from candidates other than the prescribed application fee.
Final eligibility and dates are always subject to the latest official notification. Content marked “Pending verification” is not presented as verified advice.